HP Deskjet 6980 Wireless Installation and Wireless Setup In windows Vista and XP
NOTE: HP Deskjet 6900 series printers include 6940, 6943, 6980, and 6983 printers.
Follow the Steps to Install DeskJet 6980 printer in Wireless.
Connect the printer to router or switch temporarily With ethernet cable and press on check mark button to print a configuration page.Once the page gets printed, please take the IP address from the printed page and ping it from computer.
To ping, open command prompt and type ping IP address then press enter.
It will give the results of Sent, Received, and Lost. Please make sure that it pinging fine.
*****If it is pinging fine follow the below steps to install the printer.
1. Click on the Start menu, move the mouse to the Settings item and onto Printers and Faxes. Release the mouse button.
2. (Or Please click Start >>> Control Panel >>> Printers and other Hardware >>> Printers and Faxes)
3. Double click the Add Printer icon.
4. Click on Next> on the Welcome Dialogue.
5. Select Local Printer and uncheck Automatically detect and install my Plug and Play printer. Click on the Next Button.
6. Click on the Create a new port radio button and select Standard TCP/IP Port from the drop-down menu. Click on Next>.
7. On the Welcome to the Add Standard TCP/IP Printer Port Wizard, click on Next>.
8. Type IP address in the text box labelled Printer Name or IP Address: It will be duplicated on the Port Name: text box. Click on Next>.
9. Depending on the type of printer you are setting up, you may be asked to select the appropriate Device Type. When you have done this and click on Next>.
10. Click Have Disk.
11. The "Install From Disk" dialog box appears. Click Browse.
12. Note: Ensure that the printer driver CD is currently inserted in the CD drive of your computer.
13. In the Browse dialog box, under Lookin drop down menu, select your CD drive.
14. In the box below, you can see ENU folder. Double-click ENU folder.
15. Now, double-click Drivers folder.
16. Double-click win2k_xp folder.
17. The hpfund09.inf file will be listed. Select it and click Ok.
18. Give the printer a name. Click on Next>.
19. Select Do not share this printer. Click on Next>.
20. 18. Unplug the Ethernet cable from the printer and Select Yes to print a test page. Click on Next>.
21. Click on Finish.
Once the installation is completed, perform the below steps to run the wireless wizard.
Please open an Internet Explorer window.
Type the IP address in the Address bar and press Enter:
The printer information page should be opened.
Click on Networking tab.
Click on 802.11 at the left side. Then click on Wireless setup tab.
Click on Start Wizard->click Next->Finish. NOTE: If it asks for WEP key, please give the WEP key (Router Security/Encryption Key) to complete the installation.
Disconnect the ethernet cable from the router and try printing.
*****If the IP address is not pinging from the computer try to reset the printer IP address using below steps..
Factory Reset:
1.Verify that the printer is on and idle. 2.Press and hold down the Report Page button. 3.While holding down the Report Page button, press the Cancel(X) button three times. 4.Release the Report Page button.
Now print a configuration page and ping it.
If it pings then continue with the installation, if it still does not ping..
Follow the below steps to route add the IP address..
Open the Command promopt window and type..
route add <> <> -t and press enter.
Then try pinging and continue with installation process.
I Hope You will be able to print in wireless mode with the 6980 printer.
Thanks!!
NOTE: HP Deskjet 6900 series printers include 6940, 6943, 6980, and 6983 printers.
Follow the Steps to Install DeskJet 6980 printer in Wireless.
Connect the printer to router or switch temporarily With ethernet cable and press on check mark button to print a configuration page.Once the page gets printed, please take the IP address from the printed page and ping it from computer.
To ping, open command prompt and type ping IP address then press enter.
It will give the results of Sent, Received, and Lost. Please make sure that it pinging fine.
*****If it is pinging fine follow the below steps to install the printer.
1. Click on the Start menu, move the mouse to the Settings item and onto Printers and Faxes. Release the mouse button.
2. (Or Please click Start >>> Control Panel >>> Printers and other Hardware >>> Printers and Faxes)
3. Double click the Add Printer icon.
4. Click on Next> on the Welcome Dialogue.
5. Select Local Printer and uncheck Automatically detect and install my Plug and Play printer. Click on the Next Button.
6. Click on the Create a new port radio button and select Standard TCP/IP Port from the drop-down menu. Click on Next>.
7. On the Welcome to the Add Standard TCP/IP Printer Port Wizard, click on Next>.
8. Type IP address in the text box labelled Printer Name or IP Address: It will be duplicated on the Port Name: text box. Click on Next>.
9. Depending on the type of printer you are setting up, you may be asked to select the appropriate Device Type. When you have done this and click on Next>.
10. Click Have Disk.
11. The "Install From Disk" dialog box appears. Click Browse.
12. Note: Ensure that the printer driver CD is currently inserted in the CD drive of your computer.
13. In the Browse dialog box, under Lookin drop down menu, select your CD drive.
14. In the box below, you can see ENU folder. Double-click ENU folder.
15. Now, double-click Drivers folder.
16. Double-click win2k_xp folder.
17. The hpfund09.inf file will be listed. Select it and click Ok.
18. Give the printer a name. Click on Next>.
19. Select Do not share this printer. Click on Next>.
20. 18. Unplug the Ethernet cable from the printer and Select Yes to print a test page. Click on Next>.
21. Click on Finish.
Once the installation is completed, perform the below steps to run the wireless wizard.
Please open an Internet Explorer window.
Type the IP address in the Address bar and press Enter:
The printer information page should be opened.
Click on Networking tab.
Click on 802.11 at the left side. Then click on Wireless setup tab.
Click on Start Wizard->click Next->Finish. NOTE: If it asks for WEP key, please give the WEP key (Router Security/Encryption Key) to complete the installation.
Disconnect the ethernet cable from the router and try printing.
*****If the IP address is not pinging from the computer try to reset the printer IP address using below steps..
Factory Reset:
1.Verify that the printer is on and idle. 2.Press and hold down the Report Page button. 3.While holding down the Report Page button, press the Cancel(X) button three times. 4.Release the Report Page button.
Now print a configuration page and ping it.
If it pings then continue with the installation, if it still does not ping..
Follow the below steps to route add the IP address..
Open the Command promopt window and type..
route add <> <> -t and press enter.
Then try pinging and continue with installation process.
I Hope You will be able to print in wireless mode with the 6980 printer.
Thanks!!
This comment has been removed by a blog administrator.
ReplyDelete